5 Extend Cellophane Wrapping Machine Life Method

I believe many mechanical operators know that if use machines for a long time, there will be small or big problems. If you want machines to be more stable and enduring, it is an essential thing to maintain the machine. Otherwise it is easy to cause machine failures.

Check cylinder drive components and sensors

Check the cylinder drive assembly regularly to ensure that they are flexible. Meanwhile, it is necessary to check sensors to make sure they are always on the same line. If you find the precision of the machine is poor or it is not flexible, it is necessary to repair or replace the sensor.

Check equipment regularly

If you want to make the cellophane packaging machine more perfect, you can check the equipment regularly once a month.

Firstly, you need to keep the room clean and tidy and don’t let the acid and other corrosive gases in the atmosphere flow.

At the same time, you need to repair the machine if it is at fault and don’t make the cellophane packing machine work again.

At last, keep the whole machine clean and tidy, and daub oil to prevent rust. When the machine is not in use, please cover it with the cloth.

Check cellophane wrapping machine joints carefully

Please carefully check the machine joints, make sure whether the joint is firmly connected and parts are in good use. If there is any abnormal situation, please immediately stop work and cut power, and timely notify the maintenance staff.

Maintenance methods when you do not use the machine for a long times

If you don’t use the machine for a long time, you can remove the measuring barrel and sensor in time. The exposed parts of the piston rod of each cylinder should be coated with butter to prevent rust.

When the transparent 3D packer system automatically runs in the default mode, it automatically detects and verifies that all cylinders are in the reset state. If it is not reset, the system will alarm and everything will be reset. All cylinders are reset automatically when the system is switched from automatic operation to manual operation or both (I. E. Tilting, pushing, shaping, easy pulling, folding, folding, cutting, and blowing are all reset to the initial state).

Clean cellophane wrapping machine regularly

Clean the over wrapping machine regularly to keep its appearance clean and tidy. If external dust and debris enter the machine through the inlet, It will cause pollution to the packaging items.

If you want to learn more about the cellophane packaging machine, please read the overwrapping machine ultimate guide.

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn